Product description

Housing is pressed in die-cast aluminium and designed with a very small surface exposed to wind. Cooling fins are integrated into the cover

Suspension connection is with connector for suspension installation directly on the housing

For median lane installation, the lamp must be equipped with the relative accessories in die-cast aluminium

The accessory must be applied to the housing by means of 4 steel rods with a diameter of 8mm each

The fixture applied on suspension ropes is in AISI 304 stainless steel and can be adjusted both along the horizontal axis and the vertical axis

Optics are highly efficient secondary PMMA lens combined with flux recovery system in high-performance metallic polycarbonate

Coating is the standard liquid immersion coating consists of a first metal surface pre-treatment stage, a successive epoxy cataphoresis corrosion and salt resistant coating, and a final layer of bi-component acrylic liquid UV-stabilised coating

Wiring is standard with 900/700mA and double-insulated driver 220-240V 50/60Hz

Standard supply is a device for automatic temperature control

In the event of an unexpected LED temperature rise caused by particular weather conditions or a LED failure, the system will reduce the luminous flux to lower the working temperature and guarantee proper operation

Safety diode to protect against voltage peaks pursuant to EN61547

Dedicated electronic device to protect the LED module, standard knife switch

Latest generation LED technology, Ta-30 40°C life 80%: 80.000h (L80B20).

Photobiological safety class is exempt group