Product description

Housing and arms are pressed in die-cast aluminium and designed with a very small surface exposed to wind
Optics are in aluminium coated with very high purity (99.99%) silver using physical vapour deposition (PVD)
Pole connection is pressed in die-cast aluminium, suited for poles with a diameter 60-76mm
Diffuser is extra-clear tempered glass, 5 mm thick, resistant to thermal shocks and impacts (UNI-EN 12150-1: 2001)
The coating is the standard liquid immersion coating consists of a first metal surface pre-treatment stage, a successive epoxy cataphoresis corrosion and salt resistant coating, and a final layer of bi-component acrylic liquid UV-stabilised coating
The equipment is nylon wiring plate 30% fibre glass complete with connector for mains connection and for LED module
Automatic temperature control inside the device with automatic resetting
With dedicated electronic device to protect the LED module and equipped with an air-circulation valve
The possibility to choose the correct drive current for LEDs will allow you to have the right power under specific design conditions, and also help you deal with maintenance and retrofitting problems
Using a lower current will improve the efficiency of fixtures and therefore increase energy savings, whilst a higher current will result in a higher light flux so that you can reduce the number of fixtures
Regulations are produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards